Raw Rubber Strip Separator Machine,Pullling Strip Rubber Machine,Uncured Rubber Recycling Machine
Model No.: CX66
Name : Uncured rubber steel seperating machine, Uncured rubber seperating machine,Unvulcanized rubber steel seperating machine,unvulcanized rubber seperating.
Usage: Seperate steel from the uncured rubber , or seperate steel from the unvulcanized rubber, very completely.
Technical parameters:
Model |
QRT-5 |
Remark |
Overall dimension(mm) |
1000*600*800 |
1.Need two persons to operate it.
|
Motor |
1.5kw |
Cylinder |
2pcs |
Valve |
Foot-valve |
Capacity/day |
300-400kg/day |
Turning way |
Chain turning |
Air pump |
0.7-0.8Mpa |
Features:
There are two way for steel rubber sperating, one is manual ,the other is automatic .
The principle for manual is use pneumatic and sperate steel from uncured/unvulcanized rubber.
The principle for automatic is use specially knife, it can sperate fast, capacity can be 300kg/h.
This is the environmental business, because the uncured rubber can be used again.
This is the environmental business, because the uncured rubber can be used again.
FAQ-Problems of customer concern:
About machine performance quality
1. Q: How to guarantee the quality of outsourcing parts?
A: First choice more than 4 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return.
2. Q: Which brand of electric part?
A: Use world famous brands, Siemens, Omron, Toshiba, Schneider, ABB Customer can specify the brand.
3. Q: Which PLC:
A: Siemens, Omron, Mitsubishi
4. Q: How to control the quality?
A: There are inspectors for inspecting equipment quality and performance, after a ssembly, machine run continuously for at least 12 hours at one time, Total running time should be not less than 48 hours.
About installation
1. Q: When the guide engineer arrive at customer's factory?
A: If need installation on site, engineer will arrive at factory within one week after machine arrived at factory.
About after-sales service
1. Q: What is the warranty time?
A: 5 years after machine arrived at factory
2. Q: How to solve the problem?
A: Within half an hour after getting customer' problem, inform the solution way, there are three ways for different conditions. 1, Which can be solved by phone or Email, it will be solved in two hours. 2. Which can be solved by Remote Control, it will be solved within four hours(machine is equipped by Remote Network Control Problem). 3. Which need solve it on site, engineer arrive at factory within one week(in the two years warranty date, engineer has the visa any time of the country where the machine.