Name : Hot press, Particle board hot press, Particle board making machine,Plate hot press, wood borad press
Usage : Complete set of Particle board machinery with various kinds of capacity.
Particle board is made from small-diameter wood, branches, wood residues and non-wood agricultural residues via Chip preparation, drying, spreading and hot press section. Finished boards can be used for furniture, building, packing, vehicle and decoration and lamination.
FEATURES :
1. Chip preparation section
Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring flaker by which the chips are turned to flakes, then the flake stored in wet flake bin.
2. Drying and sifting section
The flakes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.
3. Glue regulating and applying section
After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified glue independently in their glue mixers respectively.
4. Forming and hot-pressing section
The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unloader via pallet.
5.Cooling and sizing section
The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.
6. Sanding Section
The board are sanded, checked and stored
PLC control is used in mat-forming section.
Parameters below :
| Main model |
BY21-4'*8'/40-15 |
| Frame style |
Combination frame |
| Quantity and Diameter of Cylinder |
2 units Φ320mm |
| Nominal Pressure |
400Tons |
| Quantity of layers |
15 layers |
| Separation between layers |
70mm |
| Stroke of Cylinder |
1050mm |
| No-load closing time |
About 15s |
| Hydraulic system control method |
Manually/Automatic controlled |
| Hydraulic system pressure |
25MPa |
| Main motor |
11KW |
| Pressurized motor |
7.5KW |
| Main pump |
Shanghai Aviation 250 pump |
| Pressurized pump |
10ml/rev plunger pump |
| Heating platen(working table size) |
2700*1370*42mm |
| Heating Meduim in the heating platen |
steam or heat transfer oils |
| main frame steel plate thickness |
35,22,12mm |
| Upper, Bottom crossbeam |
900,800,400mm |
| Movable crossbeam |
2700*1370*400mm |
| Dimensions of Main frame |
3560*1370*4240mm |
| Weight |
32000KG |
| Production Capacity |
about 30 sheets of plywood in one hour |
Below photo is our CNC working shop for the processing of parts for the hot press
Below is the factory who use our machine
Service of us :
The production of all products are follow ISO9001:2008 organization system, from raw material processing to assembe and finally test running. even the packing, and delivery. Also we track the use of machine,installation, products producing technical ect.
All we do is for longterm cooperation , " CREATE TURST" !
Audited Supplier 
){kind=link}