China Manufacturer Intermix Rubber Internal Mixer for Kneading Rubber

• Customization: Available
• Warranty: 5 Years
• Control Type: PLC
• Model NO.: xsn-55/30
• Automatic Grade: Automatic
• Power Source: Electric
• Type: Open Mixing Mill
• Bush: Nylon Bush and Bearing Bush
• Reducer: Hardened Gear Teeth,After Heat Treatment
• Lubrication: Oil or Grease Automatic
• Transport Package: in Wooden Case Safety Packing
• Specification: ISO9001, SGS, CE
• Trademark: CX
• Origin: China
• HS Code: 8477800000
• Production Capacity: 400sets/Month

Product Description

china manufacturer Intermix Rubber Internal Mixer for Kneading Rubber

1 Mixing Chamber

It consists of a "w" shape body and two side boards made of high quality steel plates by means of extrusion forming and welding, which are jacked to take the flow of cooling water or steam. It is plated with hard chrome on its internal walls.

2 Regular Note Pump

Timing injection pump to the sealing system on a regular injection of hydraulic oil, lubrication sealing effect.

3 Thermal Resistance (or thermal couple)

There is a plug-in thermal resistance or thermal couple in middle section of the bottom of the chamber to be connected to electrical system to inspect and control the mixing temperature.

4. Rotors

It is designed to the hollow blades of banbury type. The hollows are connected with axial hole of rotor shaft used as cooling or heating passage. The top edges and the side faces of blades are surface welded with hard alloy and ground, then plated with hard chrome and polished.

5 Cooling/heating System

A common piping system is adopted for either cooling or heating material in mixing operation. Through the system cooling water or steam is fed in three ways to the cavities of the rotors blades, - the jackets of the mixing chamber and the top ram.

6 Tilting Mechanism

It consists of a rotor with brake, cycloidal gear reducer, TP type worm and worm gear, etc. It is able to actuate the mixing chamber tilting by 140° around the front rotors.

7 Dust Stop Device

At the joint between the top of mixing chamber and the cantilevered arm of the machine frame, the dust sealing assembled with curved slotted partings are used for obtaining an excellent and reliable sealing purpose. The end face of the rotor is sealed by end contact sealing with non oil-lubrication and it seals well and is wear-resistance and durable.

8 Main Driving System

The part is made up with main motor, reducer, connecting gears. It realizes odd-speed rotation of rotors with running face one other.

9 Pneumatic control system

Pneumatic control system is controlled by PLC order. A bi-directional air cylinder makes the ram up or down. In case of the over load occurs when mixing chamber, the top ram can be raised automatically or manually if necessary, so as to protect motor from overloading.

10 Electrical Control System

Imported PLC device and electric control components which are all imported products or imported technology products are adopted in the electric control system as to raise control reliability.

11 Dust Sealing Device

Mixing chamber catchy interface rack cantilever the oil dust seals and timing effect oiling dust, unique structure, the use of copper materials, good sealing performance, no leakage of the glue, powder leakage, do not pollute the environment, but also has easy maintenance and long service life.

12 Technical Parameters:
 

Item	Unit	X(S)N-3x32	X(S)N-10x32	X(S)N-20x32	X(S)N-25x32	X(S)N-35x30	X(S)N-55x30	X(S)N-75x30	X(S)N-110x30	X(S)N-150x30	X(S)N-200x30
Total Volume of Mixing Chamber	(L)	8	25	45	55	75	125	170	250	325	440
Working Volume of Mixing Chamber	(L)	3	10	20	25	35	55	75	110	150	200
Driving Motor Power	(KW)	5.5	22	37	37	55	75	110	185	220	280
Titling Motor Power	(KW)	0.55	1.1	1.5	1.5	2.2	2.2	4	5.5	11	11
Rotational Speed of The Rotor (front/rear)	(r/min)	30/24.5	32/25	32/27	32/27	30/24.5	30/24.5	30/24.5	30/24.5	30/24.5	30/24.5
Pressure of Compressed Air	(m³/min)	≥0.3	≥0.5	≥0.7	≥0.7	≥0.9	≥1.0	≥1.0	≥1.5	≥2.0	≥4.0
Pressure of Cooling Water (mixing rubber)	(MPa)	0.2~0.4	0.2~0.4	0.2~0.4	0.2~0.4	0.3~0.4	0.3~0.4	0.3~0.4	0.3~0.4	0.3~0.4	0.3~0.4
Pressure of Heating Steam (plastic mixing)	(MPa)	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8	0.5~0.8
Dimensions (L x W x H)	(mm)	2000x1000 x2220	2640x1650 x2350	2675x1650 x2560	2675x1650 x2560	3200x1900 x2950	3230x1927 x2958	3325x2615 x3150	4075x2712 x3580	4250x2750 x4106	4250x3400 x4215

FQA-Problems of customer concern:
About machine performance quality
1.       Q: How to guarantee the quality of outsourcing parts?
          A: First choice more than 4 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return.
2.       Q: Which brand of electric part?
          A: Use world famous brands, Siemens, Omron, Toshiba, Schneider, ABB Customer can specify the brand.
3.       Q: Which PLC:
           A: Siemens, Omron, Mitsubishi
4.       Q: How to control the quality?
           A: There are inspectors for inspecting equipment quality and performance, after a ssembly, machine run continuously for at least 12 hours at one time, Total running time should be not less than 48 hours.
About installation:
1.        Q: When the guide engineer arrive at customer's factory?
           A:  If need installation on site, engineer will arrive at factory within one week after machine arrived at factory.
About after-sales service
1.        Q: What is the warranty time?
           A:   5 years after machine arrived at factory
2.        Q: How to solve the problem?
           A: Within half an hour after getting customer' problem, inform the solution way, there are three ways for different conditions. 1, Which can be solved by phone or Email, it will be solved in two hours. 2. Which can be solved by Remote Control, it will be solved within four hours(machine is equipped by Remote Network Control Problem). 3. Which need solve it on site, engineer arrive at factory within one week(in the two years warranty date, engineer has the visa any time of the country where the machine.