raw rubber or Uncured Rubber Separating/Unvulcanized Rubber Steel Wire Separator
1 Application: The equipment is used for separation raw rubber and steel wire from unvulcanized tire, it I adopt Pneumatic, obtain steel and raw rubber from unvulcanized tire. Basing on the Pneumatic, so need air compressor.
2 Advantage:
1 separating clean rubber from steel
2 save labor.
A. The oil-water separator must be connected before the air pump and air belt.
B. The pressure of the air pump is 0.7-0.8Mpa.
Connect the air pump with the UNCURED TIRE STEEL WIRE SEPARATOR then go into trial operation. After its working smoothly, put the middle parts of the rubber strips (500-600)*(40-50) under the cutter to separate the rubber like the video attachment.
Note:
1. Waterproof, moisture proof, prevent nuts loosening.
2.Grease will be laid on the motor reducer and turning chain per 30 days.
Technical parameters:
| Model |
CX-66 |
Remark |
| Overall dimension(mm) |
1000*600*800 |
1.Need two persons to operate it.
|
| Motor |
1.5kw |
| Cylinder |
2pcs |
| Valve |
Foot-valve |
| Capacity/day |
300-400kg/day |
| Turning way |
Chain turning |
| Air pump |
0.7-0.8Mpa |
FAQ-Problems of customer concern:
About machine performance quality
1. Q: How to guarantee the quality of outsourcing parts?
A: First choice more than 4 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return.
2. Q: Which brand of electric part?
A: Use world famous brands, Siemens, Omron, Toshiba, Schneider, ABB Customer can specify the brand.
3. Q: Which PLC:
A: Siemens, Omron, Mitsubishi
4. Q: How to control the quality?
A: There are inspectors for inspecting equipment quality and performance, after a ssembly, machine run continuously for at least 12 hours at one time, Total running time should be not less than 48 hours.
About installation
1. Q: When the guide engineer arrive at customer's factory?
A: If need installation on site, engineer will arrive at factory within one week after machine arrived at factory.
About installation
1. Q: What is the warranty time?
A: 5 years after machine arrived at factory
2. Q: How to solve the problem?
A: Within half an hour after getting customer' problem, inform the solution way, there are three ways for different conditions. 1, Which can be solved by phone or Email, it will be solved in two hours. 2. Which can be solved by Remote Control, it will be solved within four hours(machine is equipped by Remote Network Control Problem). 3. Which need solve it on site, engineer arrive at factory within one week(in the two years warranty date, engineer has the visa any time of the country where the machine.
Audited Supplier 
){kind=link}
){kind=link}