Name: Hydralic Block Machine,Brick Making Machine, Block Making Machine,Baking-free Hydralic Block Machine, Block Machine, Concrete Block Making Machine, Concrete Brick Machine
Model: QT10-15
1.Introduction
1.Raw materials are discharged to the mixer from three Hopper batching machine, as
there is a hole under ground. The mixed raw materials are sent to the mixer.
2.After being mixed evenly with water, raw material are unloaded to the block making
machine through belt conveyor.
3.Mixed raw material are then sent to the mold case. Under PLC computer intelligent
control. Hydraulic transmission, vibration, shaping takes place.
4.After de-molding ,green brick will be unloaded to the bamboo pallet.
5.Wet product will be conveyed through green block conveyor then to the stacker.
6.Wet brick will be sent to curing place by manual cart or forklift for curing naturally
2.Brick Raw Material
1. 8-10% cement, 30-40 % sand , 50-60% crushed stone.
2. 8-10% cement, 30% flyash, 60% sand or stone powder
3.Advantages
1.Control System:
Electric control system consists of imported color touch screen and programmed PLC with data input and output device, including safety logical control and trouble shooting system. Vibration analyzing system:detecting the vibration frequency, vibration amplitude,vibration acceleration and noise of the whole machine,so as to adjust the vibration to optimum efficiency
2. Hydraulic System:
The system consists of imported components and seals with high dynamic performance proportional valves. The action of key cylinders can be operated through the regulator of flow and pressure according to the working requirement.The main frame is wide for the convenience of mold filling, so more blocks can be made. In order to get even pressure,three oil reservoirs are used, which raise the pressure to as high as 100t. Moreover,the smallest reservoir in the middle increases the operating speed of the left and right ones respectively, thus improving the productivity.
3.Frequency conversion motor drive the vibrating case,easy to obtain ideal vibration force,vibration frequency and amplitude,can produce high quality block. Unique double-vibration box drives all in one vibration table to make the deviation of amplitude lower,more even so as to guarantee the consistency firm and durable.
4.Adopts more advanced material-feeding technology,material from the hopper fall into the mould case rapidly and evenly,make the weight error less than ±5%,the intensity error less than≤±15%.
5.Low energy consuming.Compared with common Block Making Machine,these equipment investment has increased by about 18%,but output has been improved by 35%,unit consumption has been reduced by about 5%.
6. incomparable advantages in producing process:High thickness and rectangle steel frame, four guidance column,solidity structure and prolonged life.
7. Unsurpassable advantages in using process
Unique Waterproof Structure
Super high intensity
Construction convenience
wind resistance
Excellent heat insulation
Freeze-thaw test
4.Main Features
1.Solid and Strong Body : CE standard material, best steel Q235B, CO2 gas protective
weld,the machine is not likely to break.
2.customized voltage: 220V/240V/ 380V/440V/415 Volts, to confirm to your standards.
3.cost-effective: German brand Siemens motor, schneider brand switch, high quality PLC
4.Low laboring cost and friendly: hydraulic pressure, easy to operate, reducing labor force.
5. Higher Quality: heat-treated mold,the finished blocks are of high strength, large density
6.Perfect aftersale service: You can get preinstallation support, Project report support,Project guidance, Import guidance, and layout guidance,We can dispatch our technician to install machines, do commissioning, and train workers.
Main technical parameters:
| Dimension of host machine |
3500x23002930 |
Power of host machine |
37kw |
| Weight of host machine |
9.8T |
Vibration force |
100kn |
| Molding area |
1196x880mm |
Mixer model |
JS750 |
| Water consumption |
10-20T/day |
Pallet size |
1300x900x30mm |
| Workshop |
260M² |
|
|
Theoretical production capacity:
| Size (LxWxH) |
Pcs/Mould |
Pcs/Hr |
Pcs/8Hr |
| 400x100x200 |
20 |
3600-4200 |
28800-33600 |
| 400x150x200 |
14 |
2520-2940 |
20160-23520 |
| 400x200x200 |
10 |
1800-2100 |
14400-16800 |
| 400x250x200 |
8 |
1440x1680 |
1520x13440 |
| 230x110x70 |
42 |
7500-8800 |
60000-70400 |
| Pavor:200x100x60 |
35 |
6300 |
50400 |
| Pavor:200x163x60 |
20 |
3600 |
28800 |
Service of us
The production of all products are follow ISO9001:2008 organization system, from raw material processing to assembe and finally test running. even the packing, and delivery. Also we track the use of machine,installation, products producing technical ect.
All we do is for longterm cooperation , " CREATE TURST" !
Audited Supplier 
){kind=link}